Type IV

 

Front Elevation

Side Elevation

Enclosure pictured is a standard type IV equipment enclosure for irrigation pumps and equipment of that nature.

 General for Type IV:

ASSE Type 1060 outdoor enclosure for irrigation pumps and equipment of that nature. Fabricated with .040 gauge pre-finished aluminum available in any color listed below (1). Inner wall of the enclosure is lined with 1” thick type 150 fiberglass insulation. Enclosure is fabricated in two sections locked together with zinc cam/sash locks allowing for easy maintenance and testing of equipment.

 Material list

  1. .040 gauge pre-finished aluminum-available in the following colors (as pictured)

    1. Black Gloss

    2. Black Matte

    3. Bronze/Medium Bronze

    4. Brown*

    5. Burgundy

    6. Caution Yellow

    7. Chevron Blue

    8. Citgo White

    9. Construction Orange

    10. Heron Blue

    11. Ivory

    12. Ivy Green*(Pictured)

    13. Matte White

    14. Mocha Tan

    15. Pepsi Blue

    16. Purple

    17. Red*

    18. Teal

    19. Yellow

    20. White

  2. 1” thick Type 150 fiberglass insulation. All insulation complies with the property requirements of ASTM specification C1071 and is standard in all equipment enclosures.

  3. Rubatex tape insulation, placed between adjoining sections. It is used to insure a proper seal between sections and is in compliance with the following ASTM specifications:

    1. ASTM-E84

    2. ASTM C-534 Type I

    3. ASTM D-10560-SCE-41

  4. Zinc cam/sash locks used to lock the two sections of the enclosure together allowing easy removal of individual sections and complete access for testing and maintaining equipment.

  5. Handles – Zinc, standard on all enclosures, unless otherwise specified.

  6. Eye Bolts and nuts fastened through the side of the enclosure used for anchoring the enclosure. It is fastened with two nuts through the enclosure onto a .063* gauge aluminum backing plate. Safe working weight – 150 lbs.

  7. ¼” zinc spring link used for anchoring the enclosure. It is the connecting piece between the eye bolt and the stainless steel cable. Safe working weight – 180 lbs.

  8. Stainless Steel 1/8” braided cable used for anchoring the enclosure. The cable loop is terminated with a Cambell® ferrule. Safe working weight – 360 lbs.

  9. 9” long galvanized steel legs used for anchoring the enclosure. The legs, which are connected to the cable (7), are hammered into the ground.